Complete Guide: Installing DRL yellow LED headlights on your BMW 5 Series/M5 F90/G30

Installing new DRL (Daytime Running Lights) modules on your BMW 5 Series G30 or M5 F90 is a great way to enhance the appearance of your vehicle with a touch of modernity and personalization. Available in colors CSL Yellow, Red, Blue and the customizableThese DRL cards guarantee perfect integration, thanks to our manufacture to original specifications, ensuring smooth installation and exceptional aesthetics.

In this guide, we will detail every step of the installation processWe've taken great care to provide clear and precise instructions. Whether you're a mechanical enthusiast or a novice, this tutorial will help you install your new DRLs safely.

You can find our DRLs for your Series 5 G30 and M5 F90 on our Macote website.

⚙️ Step 1: Preparing and removing the front bumper

🔧 Materials required:

• Torx T20 and T30 wrenches
• Flat and Phillips screwdrivers
• Jacks and candles
• Socket box
• Plastic tools for unclipping panels

1. Disconnect battery 🔋
   Before you start, disconnect the battery from the vehicle to prevent short-circuiting.
2. Lifting the car 🚗
   Use a jack to lift the vehicle and place candles to guarantee optimum stability.
3. Remove components before 🛠️
   • Remove the bumper grilles and possible extensions such as the blade before.
   • Remove the plastic bolts and fasteners that secure the bumper.
4. Remove mudguards and bumper ⚡
   • Remove the front wheels to access mudguards.
   • Unscrew all fastening screws (Torx T20 and T30) on the mudguard.
   • Carefully unclip the bumper by progressively pulling the both sides.

💡 Step 2: Accessing and removing headlights

Once the bumper has been removed, access to the headlights made easy.

1. Locating headlight screws 🔎
   • Unscrew the four T30 main screws that maintain each lighthouse.
   • Remove the upper plastic cover if necessary.
2. Switching off headlights 🏗️
   • Unplug the electrical connectors located behind each headlight.
   • Carefully remove the headlights and place them on a clean, stable surface.

🔄 Step 3: Installing the new DRL modules yellow

1. Access the DRL module ⚙️
   • Locate the the heat sink fixed under the optics.
   • Remove the screw Torx T20 now this module.
   • Unclip the white connector with a fine tool.
2. Replacing DRL cards yellow 🔧
   • Remove the old DRLs and install the new ones.
   • Fix them properly and screw the the heat sink.
3. Repeat the operation for the second headlight ⚡
   Carry out the same procedure on the other headlight before moving on to the reconnection and testing.

🚗 Step 4: Reassemble the vehicle

1. Refitting the headlights 🔩
   • Replace the headlights correctly aligning fasteners.
   • Screw the four T30 screws and reconnect the electrical harnesses.
2. Refitting the front bumper 🏗️
   • Replace the bumper and secure it with the original bolts and clips.
   • Make sure that all connections are properly aligned.
3. Refit wheels and mudguards 🛠️
   • Retighten the fixing screws and replace the grilles and body parts.
4. Reconnect battery and test ⚡
   • Connect the battery and test your new daytime running lights to make sure they work properly.

🔎 Advice and precautions

✅ Safety first Disconnect the battery to prevent short-circuiting.
✅ Waterproofing Check that all connections are waterproof.
✅ DRL alignment Make sure the lights are correctly positioned.
✅ Test before reassembly Check for correct operation before reassembling.

🎉 Enjoy the new look of your BMW!

Congratulations 🎊! You have successfully installed your new LED DRL. Whether you opt for the CSL yellow, red, blue or otheryour 5 Series or M5 is now equipped with a unique, aggressive lookinspired by the M5 CS and M4 CSL models.

Don't hesitate to contact us share your installation and give your opinion on your experience. Thank you for trusting Macote for your automotive lighting!

🚗💨 Happy motoring with your new-look BMW!