At MacoteWe're committed to providing detailed and comprehensive guides for bmw enthusiasts like you. In this guide, we'll explain how to install your yellow DRLs on your BMW 5 Series G30 LCI and M5 F90 LCI. This installation will not only change the appearance of your car, but will also give it a new look. unique, intimidating look.
If you would like to purchase LED DRLs for your BMW 5 Series G30 LCI + M5 F90 LCIFor more information, please visit our store.
⚠️ Important Note
Our LED PCBs are uniquely designed to fit original headlamps and are not compatible with modified.
🛠️ Position light installation process yellow
Before you start, make sure the ignition is switched off and the battery is disconnected to avoid electrical problems.
🔧 Step 1: Preparation and Dismantling Front bumper
- Raise the car with an elevator or jack to gain more working space.
- Remove plastic parts located around the front of the vehicle.
- Carefully detach the grille and other necessary items.
- Remove the wheels to access the wheel arch.
- Unscrew the wheel housing screws and carefully remove the trim.
- Disconnect electrical connectors and remove the wheel arch lining. Repeat the operation on the other side.
- Unscrew the front bumper fastenersThen pull gradually on both sides to detach it. Take your time to avoid damaging anything.
🔦 Step 2: Removing the headlights
- Unscrew the screws holding the headlight in place.
- Disconnect electrical connectors and carefully remove the headlight from the vehicle.
💡 Step 3: Accessing and installing the DRL LEDs
- Locate the DRL module located behind the headlamps.
- Remove the module by unscrewing the three Torx screws.
- Unplug the connector of the module with care.
- Dismantle the old DRL panels their location.
- Install the new DRL LED panels and secure them properly.
- Make sure all connections are secure.
- Replace the module and attach it to the rear of the headlight.
✅ Step 5: Function test
Before reassembling, check that the DRLs are working properly.
- Temporarily reconnect the headlights and battery.
- Switch on vehicle and test DRL lighting yellow.
🏁 Step 6: Reassembling the vehicle
With the new DRL LED panels installedit's time to put it all back together. Follow the reverse steps taking your time for a clean, tidy result
🔚 Conclusion
We hope you have found this guide useful useful ! If you have any doubts or questions, don't hesitate to contact us to guarantee safe installation.
Reminder: Always disconnect battery before handling electrical components.
Thank you for choosing Macote as your trusted source forautomotive lighting and technical information. Happy motoring and light up your BMW in style! 🚗✨
❓ FAQ - Frequently asked questions
1. Are the DRL LEDs compatible with all BMW 5 Series G30 LCI &... M5 F90 LCI?
No, our LEDs are designed exclusively for original headlamps and are not compatible with replacement headlights.
2. Does the installation of DRL LEDs affect the vehicle warranty?
It depends on the dealer and the country. Some may consider this a changeIt's best to check before installing LED DRLs.
3. Do I need special tools for installation?
No, however it is recommended to have a set of Torx screwdrivers, pliers, a jack and, if necessary, clamps.
4. Do I have to code my vehicle after installing new headlights?
Generally speaking, no. Our DRL panels are designed to operate plug-and-play with the original system. However, in the event of a malfunction, coding may be necessary.
5. Can I change the DRL colors on all models?
No, only the RGB+W versions enable change colors via the mobile app.
6. Is the LED DRL installation reversible?
Yes, you can restore original DRLs at any time by following the reverse procedure.
🔗 Buy your BMW 5 Series G30 LCI LED DRL panels here : Yellow headlights M5 F90 LCI
📌 Need an expert for installation? Contact us now!
🚀 Upgrade the look of your BMW today!
