Aluminum Oil Cooler Protective Plate – BMW M2 G87 & M3 G80, G81 & M4 G82, G83

Protect a key component of your BMW M from splashes and impacts

On the BMW M3 G80, M4 G82, and M2 G87 models equipped with the S58 engine, the oil cooler is located very low under the front of the vehicle. This position helps meet the engine’s significant cooling requirements, but it also exposes it to greater risk of damage from flying gravel, road debris, speed bumps, or potential contact with the ground.

Visit oil cooler guard plate was designed to provide additional protection for this particularly vulnerable area. It is a particularly important preventive modification for owners who use their BMW M on a daily basis and who regularly drive on the highway or engage in spirited driving.

Protection where it's needed

Since the oil cooler is located under the front lower section of the vehicle, an impact with an object on the road could potentially damage it. A significant engine oil leak can cause serious damage to the engine, particularly due to insufficient lubrication. In the worst-case scenario, it can cause engine failure. .

This plate protects the oil cooler and the engine pan from road spray and other debris on the road, thereby reducing the risk of damage caused by minor everyday impacts or speed bumps taken too fast or too high.

It is especially recommended for:

• Daily Commutes
• Long trips and highways
• Deteriorated or gravel roads
• Sporty Driving
• Track Days
• Vehicles regularly used on roads with flying debris or loose material

A design engineered to maintain cooling

The protective cover must not only be durable; it must also allow the cooler to continue operating properly.

Protective covers designed for BMW G8X models typically feature openings that allow for adequate airflow while limiting the radiator's direct exposure to flying debris.

So the goal is simple: further protect the cooler without compromising its operation.

Protection designed for the BMW M2, M3, and M4 G8X

This plate is intended for G8X-generation BMW models equipped with the S58 engine:

• BMW M2 G87 – 2023 to 2025
• BMW M3 G80 - 2021 à 2025
• BMW M4 G82 - 2021 à 2025
• BMW M4 G83 – depending on the configuration and version

Always verify exact compatibility with the vehicle's model year and version before installation.

A subtle but truly useful change

Unlike a purely cosmetic modification, this protection serves a practical purpose above all else preventive and mechanical.

It helps reinforce the protection of a key component of the cooling system without altering the exterior appearance of your BMW. Once installed under the vehicle, it remains virtually invisible while providing additional protection against damage from the road surface.

For a BMW M used for daily driving or driven in a sporty manner, this is therefore a particularly relevant improvement.

Simple installation with no irreversible modifications

The plate is designed to be mounted under the vehicle near the oil cooler and to use the original mounting points whenever the vehicle's design allows. Several solutions available on the market are designed for installation without drilling or cutting into the vehicle.

Depending on the type of guard and the specific model, it may be necessary to remove certain parts of the underbody or front bumper to properly access the mounting points.

It is recommended that you install the product on a properly secured vehicle; if in doubt, have a professional perform the installation.

Why Install an Oil Cooler Guard?

The oil cooler is essential for the engine's proper thermal operation. However, its low position makes it particularly vulnerable to debris from the road.

Installing a protective plate therefore allows you to take a preventive approach rather than waiting for an impact to cause a leak or damage.

The Main Benefits

Protection
Reduces the cooler's direct exposure to gravel, debris, and splashes.

Ideal for sporty driving
Particularly appealing to owners who drive their BMW M cars aggressively or on the track.

Suitable for everyday use
Useful additional protection, even for primarily on-road use.

Maintenance of Cooling
The openwork design ensures adequate airflow to the cooler.

Installation on Existing Mounts
Depending on the version, installation can be done using the original mounting points without making any permanent modifications to the vehicle.